Dear All,
Is it possible to acquire the signal digitally (by the RS232 ports) of the detectors Smartline 2500 (UV) and 2300 (refraction index)? If so, a INT7 board would not be required.
I look forward to hearing from you.
Best regards,
Rui Soares Administrador
PARALAB
Tv. do Calvário, 65
Giesta
4420-392 VALBOM GDM
PORTUGAL
Tel: +351 - 22 466 4320
Fax: +351 - 22 466 4321
www.paralab.pt
Knauer detectors
Knauer detectors
Dear Rui,
the digital data acquisition from detectors is our high priority. We are working on development of the necessary drivers, at present time the digital data acquisition is available for Agilent 5890/68xx GC and 1100 series LC detectors. We hope to have the possibility for digital data acquisition from the mentioned Knauer detectors within several months time - at present the A/D board is still necessary.
Best regards
Ivan Vins
DataApex
the digital data acquisition from detectors is our high priority. We are working on development of the necessary drivers, at present time the digital data acquisition is available for Agilent 5890/68xx GC and 1100 series LC detectors. We hope to have the possibility for digital data acquisition from the mentioned Knauer detectors within several months time - at present the A/D board is still necessary.
Best regards
Ivan Vins
DataApex
Ivan Vinš
