Page 1 of 1

Rounding Up

Posted: Mon Oct 14, 2019 12:10 pm
by Ndumiso
Hi, can some please help. I ran a single compound sample, where in the calibration I specified the amount of 99.5%, however after the sample run my amount returned is 100%. I believe the Clarity maybe rounding the amount up. How does one calculate sample as per the calibration amount so the sample amount returned is 99.5% or less than?

Re: Rounding Up

Posted: Mon Oct 14, 2019 1:52 pm
by JaroslavKana
Dear Ndumiso,

Could you let me know your Clarity station serial number? How to find is described in related online documentation topic: https://www.dataapex.com/documentation/ ... -about.htm

Numeric columns in any table in Clarity can be adjusted regarding how many decimals are displayed. Please refer to related online documentation topic for setting decimals in tables: https://www.dataapex.com/documentation/ ... olumns.htm.

Besides I would like to ask you for sending respective chromatogram (*.prm file) and calibration (*.cal file) files to 'support@dataapex.com' for our inspection which could bring some light into your issue.

Best regards

Jaroslav