Dear All,
I would like to ask how to configure new column oven of YL YL9131. I tried as YL9130 but I have no results - 10060 erros appears and oven YL9131 cannot be found. Please let me know how to configure this column oven.
Best regards,
JCZajka
TLab
YL9131 LAN CONFIGURATION
-
jaroczajka
- Posts: 16
- Joined: Fri Jun 12, 2009 9:49 am
YL9131 LAN CONFIGURATION
Jarosław Czajka
-
Daniel Mentlik
- DataApex Support
- Posts: 354
- Joined: Fri Mar 27, 2009 3:15 pm
Re: YL9131 LAN CONFIGURATION
Dear Jaroslaw,
I'm not aware of the YL9131 being controlled by Clarity at the moment - at least it is not listed in the List of Controlled Devices. As the modules for YL instruments were developed by YoungLin, I will have to contact them for the answer.
Best Regards,
Daniel
I'm not aware of the YL9131 being controlled by Clarity at the moment - at least it is not listed in the List of Controlled Devices. As the modules for YL instruments were developed by YoungLin, I will have to contact them for the answer.
Best Regards,
Daniel
Daniel Mentlík
DataApex
DataApex
-
AFtp_YoungLin
- Posts: 5
- Joined: Fri Mar 27, 2009 3:15 pm
Re: YL9131 LAN CONFIGURATION
Dear Jaroslaw,
FYI as there are no changes to the software, you can control both YL9130 & YL9131 using the same YL9130 module. The column has been upgraded regardless any software changes.
We will change the name of YL9130 to YL913x in next version, because YL9130 name could lead to a confusion.
Best regards
DH Cho
FYI as there are no changes to the software, you can control both YL9130 & YL9131 using the same YL9130 module. The column has been upgraded regardless any software changes.
We will change the name of YL9130 to YL913x in next version, because YL9130 name could lead to a confusion.
Best regards
DH Cho
Mr. Kyeong Cheol Kim
